NUNXIN logoNunX-Tec
WhatsApp

INDOOR POOLS · HEAT-PIPE HEAT RECOVERY · CUSTOM-ENGINEERED

Indoor pool dehumidifier with heat recovery for your pool water

Humid pool-hall air is dried by a heat-pipe heat recovery heat pump, and the recovered condenser heat can be directed to your pool water. Each system is engineered around your pool, not sold off a shelf.

  • Dries the pool hall with a packaged heat-pipe heat recovery dehumidifier that has its own compressor
  • Recovered condenser heat can be used to warm pool water; the split is set per project
  • Built to order in Guangzhou, with quotes in US dollars (FOB or CIF)

Custom solution: the pool configuration is engineered for each project and is not a stock product. Capacity and heat output are confirmed by an engineer in your proposal.

Principle schematic (illustration, not a product photo)

01 / THE PROBLEM

A pool hall holds a lot of moisture, and ordinary air conditioning is not built for it.

Pool water evaporates all day. The moisture stays in the hall unless something removes it.

Condensation and corrosion

Moisture settles on glass, cold walls and ceilings, then attacks finishes, metalwork and electrical equipment.

Mold and a heavy, damp feel

A permanently damp hall smells stale, feels sticky and invites mold in corners and behind panels.

Heating the water costs energy

Warm pool water keeps losing heat to the hall. Heat that the dehumidifier removes from the air can be put back to use instead of being thrown away.

Hot, humid climates

In hot, humid climates, such as the Gulf, tropical coasts and humid lowlands, outdoor air carries a lot of moisture and the pool-hall air conditioning already works hard. Each door opening and each fresh-air intake brings more humid air in.

02 / HOW IT WORKS

Dry the air, recover the heat, put it where it is useful.

The core is a packaged heat-pipe heat recovery heat pump with its own compressor. A heat-pipe module pre-cools the humid air before it reaches the evaporator and reheats the dry air afterwards.

Humid air comes in

Warm, humid air from the pool hall is drawn into the unit.

Heat-pipe pre-cooling

The heat-pipe module takes heat out of the incoming air before the evaporator, without extra energy input.

Moisture is removed

The evaporator cools the air below its dew point, so water condenses out and drains away.

Recovered heat is put to use

The heat removed from the air, plus the compressor heat, is released at the condenser. It can reheat the supply air and can be directed to the pool water through a water-side exchanger.

How much recovered heat reaches the pool water, and how much goes to the air or outdoors, is decided per project. A separate pool heater may still be needed.

03 / YOUR CONFIGURATION

We configure the system around your pool.

Our standard heat-pipe heat recovery platform is adapted for pool use project by project. The options below are configured per project, and your engineer reviews them with you:

Per-project option

Pool-water side

A corrosion-resistant water-side heat exchanger. The material is confirmed for your pool water treatment, whether chlorine or salt.

Per-project option

Coil protection

A corrosion-protection coating for the coils that sit in humid, chlorinated air.

Per-project option

Excess heat

An auxiliary outdoor heat rejection path that carries away excess heat when the pool does not need it.

Per-project option

Fresh air and control

Fresh-air intake, supply air direction and controls for pool-hall humidity and water temperature, set for your site.

What we need from you

  • Pool length, width and depth
  • Indoor hall layout and glazing
  • Target pool water temperature
  • Pool water treatment (chlorine, salt or other)
  • Available power supply
  • Installation space and location of the unit

From these inputs the engineer recommends a configuration, and tells you honestly if one unit is not enough.

04 / IS IT RIGHT FOR YOUR POOL?

Built for smaller indoor pools. Larger pools are assessed separately.

We would rather tell you early than oversell a single unit.

A good fit

  • Private villa indoor pools
  • Small hotel, club or residential-complex pools
  • Small training or children's swimming pools

Assessed case by case

  • Larger pools, which may need several units or a different system
  • Sites with a large fresh-air demand in hot, humid weather, because the moisture the fresh air brings in is part of the sizing
  • Chlorine or salt-water pools, where the water-side material must be confirmed

Not a fit for one unit

  • Public 25 m lap pools, school pools and water parks
  • Open-air outdoor pools, because dehumidification applies to an enclosed pool hall
  • Projects that expect a single unit to cover everything before an engineer has reviewed the pool

Whether recovered heat covers all of your pool heating depends on the project. An auxiliary heater may still be part of the design.

05 / WHY NUNXIN

A manufacturer you can talk to directly.

Source manufacturer in Guangzhou

We design and build the equipment ourselves, so you deal with the factory, not a chain of resellers.

Heat-pipe heat recovery platform

Our NX-FL2000BP-5 series platform uses a heat-pipe module and condenser heat recovery. The pool configuration is engineered on top of it for each project.

Engineered per project

The water side, coil protection, heat rejection, power supply and controls are options configured for your pool and your site.

Lead time

The standard platform takes about 15 days to build. The lead time of a pool configuration is confirmed in your proposal.

Direct contact

Send your pool details by form, WhatsApp or email. We review your request and reply with the questions we still need answered.

06 / PROCESS

From your pool details to a delivered system.

1. Send your pool details

Use the form or WhatsApp. A rough sketch or photo of the pool hall helps.

2. Engineer review

We check the moisture load, fresh air, water side and power supply, and come back with questions.

3. Proposal and quotation

You receive the recommended configuration and a quotation in US dollars (FOB or CIF).

4. Build and ship

We build the system and confirm the lead time and shipping with you.

Installation and after-sales arrangements are discussed in the proposal.

07 / FAQ

Questions pool owners and contractors ask.

Where an answer depends on your pool, we say so.

Is this a ready-made pool dehumidifier and water heater in one box?

No. It is a custom solution. We adapt our heat-pipe heat recovery heat pump platform to your pool. A corrosion-resistant water-side exchanger, coil corrosion protection and auxiliary outdoor heat rejection are options configured per project. Capacity and heat output are confirmed by an engineer in your proposal.

Can the recovered heat really warm my pool water?

In principle, yes. The heat removed from the hall air is released at the condenser, and part of it can be directed to the pool water through a water-side exchanger. How much heat reaches the water depends on the project, and a separate heater may still be needed.

What pool size can one unit serve?

It is meant for private villa pools, small hotel or club pools and small training pools. Larger pools may need several units or a different system. We confirm this after reviewing your pool and hall.

Does it work with chlorine or salt-water pools?

A corrosion-resistant water-side exchanger is a per-project option. We confirm the exchanger material for your water treatment in the proposal, and corrosion protection for the coils in the hall air is configured per project too.

What do I need to send?

Pool length, width and depth, whether the pool is in an enclosed hall, target water temperature, water treatment, available power supply and your country. A sketch or photo of the hall helps.

How long does it take?

The standard platform takes about 15 days to build. The lead time for a pool configuration is confirmed in your proposal, and it does not include shipping or import procedures.

Who installs it, and what about service?

We are a manufacturer in Guangzhou, China. Installation and after-sales arrangements are discussed in the proposal.

Do you publish prices?

No. Each system is configured to the project, so we quote per project in US dollars (FOB or CIF) after the engineer review.

This page describes a custom solution. It contains no performance figures because capacity and heat output depend on your pool, hall and site.

08 / ENGINEER REVIEW

Tell us about your pool.

Send us your pool details on WhatsApp or by email, and an engineer will review them and come back with any questions we still need answered. Useful details: pool size, whether the pool is in an enclosed hall, your country and your power supply.

WhatsApp +86 135 0154 8155

Email gwj@nunx-tec.com

WhatsApp